Ugrás a tartalomra

Információ a jelen letöltésről


Updating is simple and with the newest firmware version, you can get even more from your Reader™. Please read carefully the following instructions.


  • Date released: 17/03/2011
  • Name: Reader™ PRS-350 System Update Version 1.0.00.14080
  • Applicable models: PRS-350
  • Benefits and improvements:
    • Reader cannot open a purchased book and “Protected Page Error” is displayed
    • Annotations on a purchased book are lost

Telepítés

What you need

  • Operating systems
    • Microsoft Windows 8 (32-bit and 64-bit)
      • Windows 8.1
      • Windows 8.1 Pro
      • Windows 8
      • Windows 8 Pro
    • Microsoft Windows 7 (32-bit and 64-bit)
      • Windows 7 Starter
      • Windows 7 Home Basic
      • Windows 7 Home Premium
      • Windows 7 Professional
      • Windows 7 Ultimate
    • Microsoft Windows Vista (32-bit and 64-bit)
      • Windows Vista Home Basic with Service Pack 2 or later
      • Windows Vista Home Premium with Service Pack 2 or later
      • Windows Vista Business with Service Pack 2 or later
      • Windows Vista Ultimate with Service Pack 2 or later

Before you update

Important notes:

  • The software update process takes about 6 to 8 minutes
  • To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding
  • It is highly recommended to print out these instructions as a reference during the installation process

Download and install the update

The Sony Reader™ must be fully charged before installing this update. Failure to fully charge the Sony Reader™ before installing the firmware update may cause the Reader™ to be unresponsive or to require repair

  1. Within the Reader for PC software, click the Help menu command
  2. At the Help menu, click Check for Updates
  3. Click OK to download the update

Alternate Installation method instructions:

  1. To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding
  2. Please confirm again that your model is PRS-350before you start the download
  3. Download the PRS-350_Updater_1.0.00.14080.exe file to a temporary or download directory (please note this directory for reference).
    Please check if the file has been downloaded correctly without any damage: Right-click your mouse after placing the mouse cursor over the file, and then click Propertiesin the menu.Click the digital signature tag and check if the name of signer shows correctly Sony Corporation
  4. Connect the Reader™ to the computer with the supplied USB cable
  5. Wait until the USB connected screen is displayed on the Reader™, and then tap Yes
  6. If the Reader for PC software starts, close Reader for PC before continuing
  7. Go to the directory where the file was downloaded and double-click PRS-350_Updater_1.0.00.14080.exe file to begin the installation

    Warning: Do not disconnect the Reader™ during the update process

  8. Follow the on-screen instructions to complete the installation
    Note: The Reader™ will automatically restart during the update process
  9. After the software update is complete, an Update Completed message is displayed
  10. Click the X to close the update utility

After the Reader™ restarts, and the Reader™ displays an update complete message, the installation of the Reader™ Update is complete.

Check if the firmware update completed successfully:

  1. On the Reader™, press the Home button
  2. At the Home screen, tap >, and then tapSettings
  3. At the Settings screen, tap About, and then tap Device Information
  4. At the Device Information screen, Version 1.0.00.14080 should be displayed

Note: If the version is not 1.0.00.14080, please re-download the update, and then perform the firmware update again.

Kérdések és válaszok

Possible Errors during update:

ERROR: "Please first quit Reader for PC and try again." is displayed.

RESOLUTION: Close Reader for PC, close PRS-350 Updater via the X button, and restart PRS-350 Updater 1.0.00.14080 .exe

ERROR: "Update isn't complete. Please try again" is displayed.

RESOLUTION: Close PRS-350 Updater by X button, and disconnect the USB cable from PRS-350, and do the Installation Instructions again.

ERROR: Update button of PRS-350 Updater is not enabled even if PRS-350 is connected to the computer.

RESOLUTION: Close PRS-350 Updater by X button, disconnect the USB cable from PRS-350 and press reset button of PRS-350. Restart PRS-350 by PowerKey and do the Installation Instructions again.

Fájlinfó

Fájlnév

  • PRS-350_Updater_1.0.00.14080.exe

Fájlméret

  • 21.18 Mb