Ugrás a tartalomra

Telepítés

Firmware Update US06 for QSI SBW-242U (CD-RW/DVD Drive)

This program will update Firmware on the following VAIO Notebook models running Windows XP:

PCG-FR315B

PCG-FR315M

PCG-FR395EP

PCG-FR415B

PCG-FR415M

PCG-FR495EP

PCG-K115B

PCG-K115M

PCG-K195BP

PCG-K195HP

This firmware fixes following issue :

- Added support for readability of a DVD+R Dual Layer Single session Finalized disc.

IMPORTANT NOTES: PLEASE READ CAREFULLY

Please make sure that there is no disk in the device before you execute this firmware.

Do not shutdown the unit while the Firmware update procedure is in progress.

Do not stop the Firmware update procedure while in progress.

Not following any of the above, could severely damage your system !!

1. How to verify if your unit has a QSI SBW-242U ?

1. Click on the Start button and then right click on My Computer.

2. Click on Properties.

3. Select the Hardware tab and than click on Device Manager.

4. Double click on DVD/CD-ROM drives.

5. Verify now that you can see "QSI CDRW/DVD SBW-242U".

6. If you have the corresponding drive, than you can proceed with the Firmware upgrade.

2. Download Instructions

1. Download the fileQSISBW242U_US06.exe, and save it to a download directory (ex. C:\Download\).
2. Go the download directory, and double-clickQSISBW242U_US06.exe.
3. A popup will appear : This will extract all files to C:\Download\Firmware QSI SBW-242U (US06)\. Press OK to proceed.
4. A popup will appear : All files have been extracted successfully !
5. Press OK to finish.

3. Installation Instructions

1. Open the Windows Explorer.

2. Browse to folder : C:\Download\Firmware QSI SBW-242U (US06)\.

3. Double click file : SBW-242U-US06-40406.exe.

4. Dialog box will pop up : Please choose your language ?

5. Select the language of your choice.

6. Please read the following items and make sure all is confirmed before proceeding..

7. Click the OK button.

8. Click the Update button. This will open the tray of the optical drive.

9. Dialog box will pop up : Click OK then system will be restart.

10. Click the OK button. The unit will restart.

11. The firmware updates has been applied successfully. Please note that at next boot the OS will redetect the optical drive.

4. How to identify the new version?

1. Open the Windows Explorer.

2. Browse to folder : C:\Download\Firmware QSI SBW-242U (US06)\.

3. Double click file : SBW-242U-US06-40406.exe.

4. Dialog box will pop up : Please choose your language ?

5. Select the language of your choice.

6. Click the OK button.

8. if the version mention under "Current" is equal to the version mentioned under "After Updated", the firmware update has been applied successfully.

9. Click the Cancel button, to exit

IMPORTANT NOTES: PLEASE READ CAREFULLY.

Sony Corporation will not be responsible for any problems caused by customer"s improper operation when customers did not follow the instructions below.

1.Make sure to follow the instruction correctly in this program.
2.This program is only for the above stated Sony VAIO notebooks.
3.The property rights protect this program. Customers are not allowed to deliver a copy, or use in a way Sony does not determine.
4.Sony Corporation is not responsible for any loss or damage caused directly or indirectly from using this program.

Sony, VAIO and the VAIO logo are registered trademarks of Sony Corporation.
Microsoft, MS, MS-DOS, Windows and the Windows logo are registered trademarks of Microsoft Corporation.

All other trademarks are trademarks of their respective owners.

Fájlinfó

Fájlnév

  • QSISBW242U_US06.exe

Fájlarchitektúra

  • 32 bit

Fájlméret

  • 1.49 Mb

Kibocsátás dátuma

  • 01-82-2004